Steel Raiser for the Professional 4-Pizza Oven

DESIGNED FOR AN EVEN MORE COMFORTABLE PROFESSIONAL EXPERIENCE

The Steel Raised Base for the 4 Pizze Professional oven is a custom-designed raised base for the Alfonso Forni Professional range, compatible with both the gas-only version (LPG/natural gas) and the hybrid wood and gas version. This accessory is sold separately and can be used in two configurations: either inserted between the trolley and the oven, or positioned directly beneath the oven in the trolley-free version, acting solely as a support. Unlike the standard raised base for wood-fired models with a trolley, this version has been developed to fit the 4 Pizze Professional perfectly, raising the worktop and making cooking, pizza handling and the day-to-day use of the oven more convenient, even during intensive and continuous use.

The 4 Pizze Professional oven, in both the gas and hybrid versions, has a different structure and weight compared to wood-fired models with a trolley: for this reason, the dedicated riser is not simply an adaptation of the existing model, but a component designed from scratch. The 120 cm width distributes the load more evenly across the entire base of the oven, whilst the 12 cm height ensures there is sufficient space to move comfortably around the burners during maintenance, as the burners on these models are removable and must be inspected periodically.

Technical Specifications and Benefits of the Raised Base

• Support surface: the 120 cm width safely supports the entire frame of the Professional oven, even at peak load during service.
• Set-up: it can be placed between the closed trolley and the oven, or positioned directly beneath the oven in the freestanding version.
• Higher working height: the 12 cm height reduces the need to bend down whilst loading the oven, a detail that makes a significant difference when working for hours on end.
• Easier access to the burners: the space beneath the base makes it easier to check and remove the burners for regular cleaning.
• Aesthetic and structural consistency: the riser is designed to integrate visually and structurally with the Professional range, without compromising on sturdiness or stability.

Materials and durability

The AISI 304 stainless steel structure is designed to withstand the intensive use typical of pizzerias, restaurants and catering businesses, where the oven remains on for many hours a day and is frequently moved or cleaned. This alloy offers good resistance to corrosion and high temperatures, maintaining the base’s appearance and sturdiness even after years of daily use and when installed outdoors.

Recommendations for use

• Before placing the countertop oven on the stand, check that the stand is positioned on a flat surface: a level surface distributes the weight more evenly and prevents wobbling during use.
• When configuring the trolley and oven together, carefully align the contact points between the two structures to reduce vibrations when moving the unit.
• For the freestanding version only, position the stand so that the burner side is left clear: this will make cleaning and routine maintenance quicker.
• Clean the stainless steel surface with soft cloths and neutral detergents, avoiding abrasive sponges which can damage the finish over time.
• If the oven is used outdoors, periodically check the support points on the ground: checking their stability helps prevent settling after months of use

Frequently Asked Questions

• Which oven is this riser compatible with? This riser is designed for the Alfonso 4 Pizze Professional oven, in both the gas-only version (LPG/natural gas) and the hybrid wood and gas version. It is not compatible with the wood-fired models in the trolley range, which have different dimensions.
• Why is this riser higher than the one for wood-fired models? The height of 12 cm, compared to 10 cm for the standard version, provides the necessary space to access the Professional model’s removable burners during maintenance.
• How do you use the riser, with or without the trolley? The riser is suitable for both configurations: you can place it between the trolley and the oven, or position it directly under the oven if you have the version without a trolley, which stands freely.
• Can I buy the riser separately if I already have the oven? Yes, the riser is a separately sold accessory, designed for those who already own the 4 Pizze Professional oven and wish to add it at a later date, in either configuration.

Complete your Professional workstation

Add the Steel Raiser for the 4 Pizze Professional Oven to your order and ensure your workstation has the stability and ergonomics required for daily, continuous use.