Flue Pipes, 130 mm in diameter, for Domestic Ovens

An element that allows the chimney to be connected at 90° to the smoke duct. The special feature of the straight connection is that it is obtained by extruding a linear element.

Linear element, 245 mm high, for use in vertical or sub-horizontal sections.

Terminal element to be placed at the top of the chimney, designed to protect against the ingress of rain, snow and wind.Not recommended for chimney heights of less than 4 metres, as it may restrict proper draught.

The wind cap (also known as chimney cap or wind terminal) has the function of protecting the inner walls of the chimney from the weather.

Element allowing 135° connection of the chimney with the smoke duct.

Element with valve designed to regulate the opening and closing of the smoke passage.

Inclined Flue Plate 5° to 45° Roof Diameter, Stainless Steel Aisi 304 5/10 - Chimney Flues

Straight Facing Plate Used To Make A Bulkhead Passage In Canopies. Create the Hole, Insert the Cone Section Welded to the Base and Insert the Flue Pipe and Tighten the Flue Pipe Tie Ø130mm